Updating Firmware Through Bootable USB Key
A lot of techs out there do not know how to create a bootable USB key to run firmware updates. That’s ok, it’s not often that you need to do …
HyperV NIC Teaming
Here is a quick how to for setting up HyperV NIC teaming. Keep in mind, NIC Teaming has already been setup. Note: NIC Teaming has already been setup in Broadcom Access …
iDrac – Virtual USB Device Error
The other day I was updating running firmware/driver updates on a 12G Dell server. I like to start with the iDrac firmware and work my way through the BIOS, Chipset, …
iDrac_Undefined Error
I came across this little beauty the other day. I launched the browser on the server and navigated to the iDrac IP address and was greeted with the “Undefined HTTP …
Straight-Through vs Crossover Cables
Ever wonder how to remember when to use a straight-through cable vs a crossover cable for an exam or for future job interviews? Or maybe you want to use the …
iDrac Remote Console Error – Windows Can’t Open This File:
I have only ran into this issue a few times and it took me a bit to realize what was going on. When opening the iDrac Remote Console using the …
Mounting ISO in iDrac7
With the Enterprise Licence installed on the iDrac7 you have the option to mount ISOs and boot to them during POST. This is a terrific feature for those of you …
Updating Firmware via iDrac7 WebGUI
This is a quick tutorial on how to run firmware updates through your iDrac7 Web Interface. You can run almost all your firmware update through here and even do multiple …
Deleting RAID in PERC BIOS
Deleting your RAID through the PERC BIOS is a pretty quick process. This tutorial will show you how to delete a Virtual Disk and HERE is how to create a Virtual Disk. This tutorial …
Creating RAID in PERC BIOS
Configuring your RAID through the PERC BIOS is a pretty quick process. This tutorial will show you how to create a Virtual Disk and HERE is how to delete a Virtual …