Your server has been working for years with no hiccups and you could not be happier purchasing your Dell product. Suddenly things take a turn for the worst, and it now operates at a snails pace. What was once a top of the line server is now as slow as your Pentium 3 Desktop that’s stored under your bed.
You can barely troubleshoot because of the horrific performance. Sometimes rebooting clears up the problem for a few hours or even days but the problem returns. That’s no way to live; always wondering when your machine is going to betray you and your companies employees. Turning on you, just when you need it most!
I have run across this very issue on many many servers. There is a quick simple fix that can be administered to the system. Change the System Profile Settings to Performance Mode.
The reason to make this change, is to Disable C State and C1-E features. When these options are enabled the Dell server will throttle the power to the components (CPU, Memory, etc).
Ok, so how is this bad?
Sometimes the system can get stuck in a low power state and cannot properly adjust when heavy load is applied to the system. This could cause the entire system to halt, slow down to unusable speed, and report CPU IERR errors.
You probably don’t pay the electric bill and system reliabiltiy for a corporation is far more important than a few dollars. Let’s change these settings!
There are two areas to adjust these settings – OMSA and BIOS. This guide will discuss adjusting these settings in the BIOS during POST.
Reboot your server and enter System Setup by pressing F2 on the screen with the Dell splash screen logo.
Enter the System BIOS
Press System Profile Settings
On the Setup Profile drop down menu select: Performance
Apply the settings and reboot!
Note: 11G systems do NOT have the System Profile Settings. You can simply disable C State and C1-E modes.
If you were experiencing any of the above symptoms I mentioned above, it would be a good idea to update the firmware on the system and possibly run hardware diagnostics when troubleshooting a performance issue.
Got a project that needs expert IT support?
From Linux and Microsoft Server to VMware, networking, and more, our team at CR Tech is here to help.
Get personalized support today and ensure your systems are running at peak performance or make sure that your project turns out to be a successful one!
CONTACT US NOW