You may receive an error on the front panel of your Dell PowerEdge saying that the SEL is full and needs to be cleared. This issue needs to be addressed because the system may have an error in the future that will not be logged in the System Event Log. If the error is not logged, it may be difficult to track down future problems on the system.
There are multiple ways to clear the SEL. It can be done through OMSA, iDrac, or from BIOS.
Clearing the System Event Log (SEL) via BIOS :
During POST, on the screen with the Dell splash screen logo, press F2 to enter the System Setup
On the System Setup Main Menu press iDRAC Settings
Click System Event Log
Press Yes on the Clear Records line
Click Finished
Confirm the changes – press Yes
Got a project that needs expert IT support?
From Linux and Microsoft Server to VMware, networking, and more, our team at CR Tech is here to help.
Get personalized support today and ensure your systems are running at peak performance or make sure that your project turns out to be a successful one!
CONTACT US NOW