Note: This blog post is for Dell PowerEdge 12G systems. Here is the 11G how to: http://crtech.tips/lifecycle-controller-hanging-during-post/ Sometimes a Dell PowerEdge 12G system can get caught in POST. This is caused by a LifeCycle Controller glitch. You’ll know you are caught when you see “Intializing firmware interfaces…” for 30+ minutes. I have seen this happen when you boot
Tag Archives: Lifecycle Controller
Note: This blog post is for Dell PowerEdge 11G systems. Here is the 12G how to: http://crtech.tips/12g-lifecycle-controller-hangs-during-post Sometimes a Dell PowerEdge system can get caught trying to boot into the LifeCycle Controller(LCC). Basically, when POSTing the system will hang on a Dell Logo with the error message “Entering System Services… Starting Unified Server Configurator” There is a way
UPDATE: Here is a list of pre-made ISOs updated about once a month: http://crtech.tips/bootable-firmware-repository-isos/ Welcome to the Part 2 tutorial for updating your Dell PowerEdge System via Dell Repository Manager! If you missed Part 1 it is right HERE. Ok, now that you are all caught up and your ISO has been created, let’s
This is a quick tutorial on how to run firmware updates through your iDrac7 Web Interface. You can run almost all your firmware update through here and even do multiple updates at a time using the Job Queue feature. Prerequisites: -Before beginning this guide, I would recommend that your iDrac7 be at the latest firmware.