I ran across an odd issue the other day with the iDrac WebGUI. Hopefully this issue has been addressed in the latest the iDrac firmware updates. Anway, the issue was that the iDrac6 menues were not showing up, but everything was working. See the pic below: Note this issue was in Internet Explorer. I did
Tag Archives: iDrac6
Recently, I ran across a gentleman who was having some difficulty installing a SSL certificate to his iDrac6 and iDrac7 systems. The GUI upload for some reason was not working and he didn’t really care because he had to install the certificate and key on dozens of Dell PowerEdge Servers. The best way to go
I came across this little beauty the other day. I launched the browser on the server and navigated to the iDrac IP address and was greeted with the “Undefined HTTP 404” error. This was an odd error because other iDrac WebGUI(s) were working: iDrac5 and iDrac7 Note: The R910 is 11G Dell server and has iDrac6
This is a quick tutorial on how to run firmware updates through your iDrac7 Web Interface. You can run almost all your firmware update through here and even do multiple updates at a time using the Job Queue feature. Prerequisites: -Before beginning this guide, I would recommend that your iDrac7 be at the latest firmware.